3
APS901Z Owners rev A.
Using Your Remote Control
Door Unlock
While the engine is running press and release and hold the
button or 3 seconds.
Unlock is only avaiable while the vehicle is remote started.
Remote Starting Your Vehicle
To activate the remote start, press and release the
button 2 times. The vehicle will
start and run the predetermined time set up during installation (5 to 60 minutes
selectable).
Remote Start Shutdown
Press and release the
button two times to turn the vehicle off. Pressing the
vehicle’s brake will also shutdown the remote start.
Entering the Vehicle while it is Running via Remote Vehicle Start
1. Unlock the vehicle’s doors.
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or RUN
position.
4. Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.
NOTE:
This feature may not be available on all vehicle makes/models. In some
vehicle applications the the remote start will shut down upon entering the vehicle and
the engine will stop running. For these applications it will be necessary to restart the
vehicle normally. Refer to installing dealer for details.
Preheating or Precooling the Vehicle’s interior
Before exiting the vehicle, set the temperature controls to the desired setting and
operation. After the system starts the vehicle, the heater or air conditioner will
activate and heat or cool the vehicle’s interior to your setting.
