PRESONUS studiolive III series, Руководство пользователя

Страница: 163 / 232

103
11 Graphic EQ StudioLive™ Series III
11.1 Assigning GEQs Owner’s Manual
11.1 Assigning GEQs
分配
GEQs
To assign a Graphic EQ to one of the mixes, select the desired mix and press the GEQ
button. This will open the GEQ screen. Touching a mix will insert a Graphic EQ on it
post-fader.
将图形均衡器分配给其中一个混音，选择所需的混音，并按
GEQ
，打开
GEQ
图
像。触控一个混音，将在推子后插入一个图形均衡器。
On the upper right hand side of the screen, you will see how many GEQs are available
to be assigned.
在屏幕的右上方，你会看到有多少
GEQ
可以被分配。
You will be alerted when every available GEQ has been assigned.
分配每一个可用的
GEQ
后，会有提醒。
Once assigned, you can access the GEQ at any time by pressing the GEQ button on
your desired mix:
一旦分配好，按下所需混音上的
GEQ
按钮，任何时候你都可以访问
GEQ
：
Use the Fat Channel encoders to control the Graphic EQ in banks of eight. Use the
Master Control encoder to scroll to a different bank.
使用
Fat Channel
编码器来控制八组得
Graphic EQ
均衡器。使用
Master Control
编码器来滚动到不同的库。
11.2
Using the GEQ
使用
GEQ
1 2 3 4 5 6 7 8
1.
On/Off.
Use this button to enable/disable the current GEQ.
用这个按钮来启用
/
禁用当前的
GEQ
。
2. Current Bank. By default, the GEQ is controlled from the Fat Channel encoders
in banks of eight. This highlights the bank that is currently being controlled from
the Fat Channel. Use the value encoder to move to another bank.
默认情况下，
GEQ
是由
Fat Channel
编码器控制的，每组
8
个。这里显示当前
由
Fat Channel
控制的库。使用数值编码器，可以移动到另一个库。
3. Assign. Opens the Assign GEQ screen. See Section 11.1 .
打开
"Assign GEQ "
图像。
见第
11.1
节
。