7
7.1
Cubase / Nuendo (MCU)
Getting Started
ioStation24cAudioInterfaceandProductionControllers
Owner’s Manual
7.1
Getting Started
开始工作
7
Cubase / Nuendo (MCU)
Bydefault,theioStation24cisinStudioOneoperationmode.To
switchtoCubase/Nuendooperation,pressandholdtheNEXT
button while powering on your ioStation 24c, then press the Bypass
button to enable Cubase / Nuendo (MCU) operation.
Once you have connected your ioStation 24c to your computer, launch Cubase
orNuendotosetuptheioStation24casaMackieControlUniversaldevice.
默认情况下,
ioStation 24c
处于
Studio One
操作模式。要切换到
Cubase/Nuendo
操作,请在开机时按住
NEXT
按钮,然后按
Bypass
按钮,
启用
Cubase/Nuendo
(
MCU
)操作。
一旦你将
ioStation 24c
连接到你的电脑,启动
Cubase
或
Nuendo
,将
ioStation 24c
设置为
Mackie Control Universal
设备。
1. Go to Studio | Studio Setup.
2. ntheSetupwindow,clickthe“Add/Remove”menu
to add the first Mackie Control device.
3. Select“Mackie Control”from the pull-down menu.
Cubase (MCU)