34
UK
FM mode selected (only in
U
configuration
/ ENG
) (blinks
in
PA
mode)
ROGER BEEP function activated
BP
KEY BEEP function activated
Automatic Squelch Control activated
VOX
VOX function activated
SCAN function activated (the dot blinks)
MENU mode activated
Indicates the channel or band selected
Indicates frequency or menu
6) CB/PA ~ CB TB
3 position switch :
CB
,
CB TB
and
PA
.
CB/PA
Switch between
CB
and
PA
(Public Address) mode.
An external optional speaker can be connected to the unit to the PA.SP. jack
on the rear panel. (
D
). LCD indicates
PA
mode by blinking the modulation
mode (AM/FM/UK).
For more details on operating in PA mode, see the
PA SETTING
menu on
page 37.
CB TB
Allows the activation of the
TALKBACK
function.
TALKBACK function
This function allows you to
hear
your own modulation in the optional internal
or external speaker connected to the EXT jack. MS. (
C
).
When activated, LCD shows the
TALKBACK
level during 3 seconds.
TALKBACK level
Press and hold the
PTT
switch (
13
) then turn the rotary
CH
knob (
3
) to
in-
crease
(clockwise) /
decrease
(counterclockwise) the volume level of the
TALKBACK
. Release the
PTT
switch (
13
).
7) NB/ANL - HI-CUT FILTERS
3 positions switch:
Low position:
no filter is activated.
Central position:
only
ANL
and
NB
filters are enabled.
High position:
all filters (
ANL
,
NB
and
HI-CUT
)
are activated.
NB:
Noise Blanker /
ANL:
Automatic Noise Limiter. These filters allow reducing
back ground noises and some reception interferences.
HI-CUT:
Cuts out the high frequency interferences and has to be used in
accordance with the reception conditions.
Note:
ANL
filter works only in AM mode
8) PRIORITY CHANNELS
Priority channels will be automatically
selected
by switching this key (
8
).
3 positions switch:
EMG1
/ Priority channel 1 is activated.
EMG2
/ Priority
channel 2 is activated.
OFF /
No priority channel is activated.
The default priority channels are channel
9/AM
(
EMG1
) and channel
19/
AM
(
EMG2
).
See the
EMG SET 1
and
EMG SET 2
menus page 37 to
set
priority channels.
Note:
Activating a priority channel prevents changing the modulation
mode (AM / FM / UK), scanning the channels or activating the
PA
mode.
If the
KEY BEEP
function is activated, an error beep sounds.
“EMG”
and the
channel blink to indicate unauthorized handling. Turn the switch (
11
) to the
OFF position to use these functions.
9) F ~ FREQUENCY BAND SELECTION
F
(short press)
Enter
MENU
. See §
MENU
page 35.
FREQUENCY BAND SELECTION
See §
FUNCTION TURNING ON THE UNIT
page 35.
10) MODE ~ VOX
MODE
(short press)
Press
MODE
key (
10
) to
select
the modulation mode: AM or FM. Selected
mode is displayed on LCD.
Your modulation mode has to correspond to the one of your correspondent.
-
Frequency Modulation / FM:
for nearby communications on a flat open
field.
-
Amplitude Modulation / AM:
communication on a field with relief and
obstacles at middle distance (the most used).
In U configuration only:
The
MODE
key (
10
) allows to
select
the
ENG
or
CEPT
frequency band.
“UK”
is displayed when the
ENG
frequency band
is selected. When the
CEPT
frequency band is selected,
“UK”
disappears
from the display
(see table on page 54)
.
English