PRESIDENT MINI 430 S, Руководство пользователя, Страница: 27 / 36

27
Even if the signal on channel A (B) disappears, Dual Watch remains to check this channel during scan delay time. Once scan
delay time is out, the other channel will be checked.
If you press the s or t button when a signal is received at A channel in the Dual Watch feature, an error tone will sound.
However, if you press the s or t button when there is no received signal or there is a receiving signal at B channel, B
channel will move to higher (lower) channel. In the Dual Watch feature, the Power Save "PS" feature does not operate.
Using the call channel
C "Call" button [7]
To activate, press the "C" button in the receiving mode including Memory channel mode, Scan Mode and Dual Watch. Call
channel number is fixed as CH 38 (Frequency 434.000 MHz), cannot be modified.
- Display of call channel No.
To disable, press the "C" button once again.
– If you press "C" button in Scan/Dual Watch mode Scanning/Dual Watch process will stop and
change to Call mode.
Keypad lock
Lock button [7]
To Activate - Press the "F" + "C(Lock)" button. The key will appear on the LCD to indicate that this feature is currently
activated. To disable: Repeat process described in "To Activate". The key will disappear from the LCD.
Resetting the device
If you wish to erase all of the stored channels and reestablish the automatic options, press and hold the "F" + "MO" but-
tons while turning on the device. "InItIaL" appears on the display. Release the "F" + "MO" buttons. Your transceiver is
now set as it was originally.