
13
TALKBACK FUNCTION
(
PTT
+ •
F/MEM
)
Press first
PTT
switch (
12
) and then •
F/MEM
key (
6
) to acti-
vate/deactivate
TALKBACK
function. When the function is
on
,
“TALKBACK”
is displayed.
TOT (Time Out Timer)
If the transmission (using the
PTT
(
12
) key or
VOX
)
is more
than 5 minutes, CHANNEL and
starts blinking, the trans-
mission ends.
The time-out tone will sound until the
PTT
key is released.
A) DC-POWER TERMINAL (13,8 V / 27,6 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8
Ω
, Ø 3,5 mm)
D) PA SPEAKER JACK (8
Ω
, Ø 3,5 mm)
E) JACK FOR OPTIONAL VOX MIKE (Ø 2.5 mm)
C) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
: 40
- Modulation modes
: AM
- Frequency ranges
: from 26.965 MHz to 27.405 MHz
- Weather channels
: from 162.400 MHz to 162.550 MHz
- Antenna impedance
: 50 ohms
- Power supply
: 13.8 V / 27.6 V
- Dimensions (W x D x H)
: 6.69 x 5.91 x 2.05 inches
170 x 150 x 52 mm
- Weight
: 2.20 lbs / 1 kg
- Accessories supplied
: Ultra light electret microphone with
support, mounting cradle, screws
2) TRANSMISSION
- Frequency allowance
: +/- 200 Hz
- Carrier power
: 4 W (constant)
- Transmission interference
: inferior to -60 dBc
- Audio response
: 300 Hz to 3 KHz
- Emitted power in the adj.
channel
: inferior to 20 µW
- Microphone sensitivity
: 3 mV
- Drain
: 2 A (with modulation)
- Modulated signal distortion : 1.8 %
3) RECEPTION
- Maxi. sensitivity at
10 dB (S+N)/N
: 0.6 µV - 111 dBm
- Frequency response
: 300 Hz to 3 kHz
- Adjacent channel selectivity : > 60 dB
- Maximum audio power
: 2 W
- Squelch sensitivity
: minimum 0.2 µV - 120 dBm
maximum 1 mV - 47 dBm
- Frequency image rejection
rate
: 60 dB
- Intermediate frequency
rejection rate
: 70 dB
- Drain
: 300 mA nominal / 1000 mA maximum
D) TROUBLE SHOOTING
1) YOUR CB RADIO WILL NOT TRANSMIT OR YOUR
TRANSMISSION IS OF POOR QUALITY
- Check that the antenna is correctly connected and that
the SWR is properly adjusted.
- Check that the microphone is properly plugged in.
English