12
12) PTT
Transmission key, press to transmit a message,
is displayed
and release to listen to an incoming communication.
14) CHANNEL SELECTOR UP on microphone
UP
key (
14
) allows increasing a channel. A beep sounds
each time the channel changes if the
KEY BEEP
function
is activated
(see
KEY BEEP
function below).
You can also use
s
key (
4
) on the unit.
15) CHANNEL SELECTOR DN on microphone
DN
key (
15
) allows decreasing a channel. A beep sounds
each time the channel changes if the KEY BEEP function
is activated
(see
KEY BEEP
function below).
You can also use
t
key (
5
) on the unit.
ROGER BEEP
Start the unit while pressing
s
(
4
) or
UP
(
14
) key to activate
the
ROGER BEEP
function. A beep sounds if
KEY BEEP
function
is
on
.
The icon “ ” appears on the display when the function is
active. The
Roger Beep
sounds when the
PTT
switch (
12
) of
the microphone is released in order to let your correspond-
ent speak. Historically as CB is a “simplex” communication
mode, it is not possible to speak and to listen at the same
time (as it is the case with a telephone). Once someone
had finished talking, he said “Roger” in order to prevent his
correspondent that it was his turn to talk. The word “Roger”
has been replaced by a significant beep. There comes
“Roger
beep”
from.
Note:
the Roger beep also sounds in the loudspeaker if the
KEY BEEP
function is active. If the
KEY BEEP
function is not
active, only the correspondent can hear the Roger Beep.
In
PA
mode the function is not allowed.
KEY BEEP
Beep on changing the channel, keys etc...
Start the unit while pressing
t
(
5
) or
DN
(
15
) key to activate
the
KEY BEEP
function. A beep sounds.
“BP”
is displayed.
Start again the unit while pressing
t
(
5
) or
DN
(
15
) key to
deactivate the
KEY BEEP
function.
“BP”
disappears.
MEMORY
This CB radio allows to memorize 3 channels with following
parameters: ANL (on/off), NB (on/off), HI-CUT (on/off).
To
recall
a
memory:
(short press)
- Short press •
F
/
MEM
key (
6
). If the
KEY BEEP
function is acti-
vated a beep sounds.
- Short press •
M1
(
9
),
•
M2
(
8
) or
•
M3
(
7
) key to recall the
selected memory.
“MEM”
and the number of the memory (
1
,
2
or
3
) appears
on the display
To
memorize:
(long press)
- Select the channel and parameters to be memorized.
- Short press •
F
/
MEM
key (
6
). If the
KEY BEEP
function is acti-
vated a beep sounds.
- Press •
M1
(
9
),
•
M2
(
8
) or
•
M3
(
7
) key during 1 second to
store the selected channel into memory.
“MEM”
appears.
- If the
KEY BEEP
function is activated a long beep confirms
the saving.
To
delete
a
memory:
- Switch off the transceiver.
- Keep the memory key •
M1
(
9
),
•
M2
(
8
) or
•
M3
(
7
) pressed
and switch on the transceiver.
- The selected memory is deleted.
“MEM”
disappears.
English