11
PA
MODE
An external loud speaker can be connected to the unit by
the PA jack plug situated on the back panel PA.SP. (
D
). The
PA
volume is regulated by
VOL
knob (
1
).
“PA”
is displayed.
ROGER
,
SCAN
,
MEM
,
VOX
are not allowed in
PA
mode. If the
user set
on
PA
mode while
SCAN
function, instant channel
9/19
mode or
WX
mode, these are canceled.
The CB message received will be directed towards the PA
speaker and be amplified.
The message transmitted into the microphone will be di-
rected towards the PA speaker and be amplified.
“PAon”
is displayed, Meter numbers indicate signal level.
LOCK
(long press)
Allows to lock all the keys on the front panel. if the
KEY BEEP
function is
on
, an error beep sounds when a key is used.
A long press on
LOCK
key (
10
) activates/deactivates the
LOCK
function. appears on the display when the function
is activated.
Transmission (microphone or vox) and reception remain
active.
•VOX
(
•F/MEM
+ short press)
The
VOX
function allows transmitting by speaking into the
original microphone (or in the optional vox microphone)
without pressing the
PTT
switch (
12
). The use of an optional
vox microphone connected to the rear panel of the trans-
ceiver (
E
) disables the original microphone.
Press one time
•F/MEM
key (
6
) and short press •
VOX
key
(
10
) in order to activate the
VOX
function.
“VOX”
appears
on the display. Repeat the key combination to disable the
function.
“VOX”
disappears.
•VOX SET
(
•F/MEM
+ long press)
Press one time the
•F/MEM
key (
6
) and press during 1 second
•
VOX
key (
10
) in order to activate the function
VOX SETTING
.
Three adjustments are possible: Sensitivity / Anti-vox level
/ Vox delay time . Press shortly •
VOX
(
10
) in order to go
to the following adjustment (looping , , ).
The display shows the type of adjustment followed by its
level.
-
Sensitivity
: allows the adjustment of the microphone
(original one or optional vox) for an optimum transmission
quality. Adjustable level from 1 (high level) to 9 (low level)
by pressing
s
/
t
(
4
/
5
) or
UP
/
DN
(
14
/
15
) keys . corresponds
to the Sensitivity
L
evel.
-
Anti-Vox
: allows disabling the transmission generated by
the surrounding noise. The level is adjustable from 0 (Off) to
9 (low level) by pressing
s
/
t
(
4
/
5
) or
UP
/
DN
(
14
/
15
) keys.
corresponds to
A
nti-vox Level.
-
Delay
time
: allows avoiding the sudden cut of the trans-
mission by adding a delay at the end of speaking. The
level is adjustable from 1 (short delay) to 9 (long delay) by
pressing
s
/
t
(
4
/
5
) or
UP
/
DN
(
14
/
15
) keys. corresponds
to Delay
T
ime.
Once the adjustments are done, short press
•F/MEM
key
(
6
) key in order to quit the
Vox Adjustment
mode.
When
VOX SETTING
is done the
VOX
function is automati-
cally
ON
.
“VOX”
appears on the display.
11) 6 PIN MICROPHONE PLUG
The plug is located on the front panel of the transceiver and
makes the setting of the equipment into the dashboard
easier.
See cabling diagram page 60.
English