PRESIDENT HARRISON II, Руководство пользователя, Страница: 46 / 76

46
4.
Short press the
EMG
key (
5
) to
validate
.
a)
Return to the point
1
to set an-
other menu or b) Short press the F key ( 9 ) to validate and exit the MENU .
disappears from the display.
5. If no key is pressed, the unit exits MENU after 10 seconds. disappears
from the display.
Default
COLOR
is: (orange) .
2) DIMMER
DIMMER function allows adjusting the brightness of the lighting. 10 steps
from
0
to
9.
Press
F
key (
9
). is displayed.
Long press F key ( 9 ) to enter the MENU .
1. Turn the rotary CH knob ( 6 ) or use UP / DN buttons ( 13 ) on the microphone
to
select
the menu.
2. Press EMG key ( 5 ) to validate. The current value blinks on the display.
3.
Turn the rotary
CH
knob (
6
) or use the
UP/DN
buttons (
13
) on the microphone
to change the value of the dimmer.
4. Short press the EMG key ( 5 ) to validate . a) Return to the point 1 to set an-
other menu or
b)
Short press the
F
key (
9
) to
validate
and
exit
the
MENU
.
disappears from the display.
5. If no key is pressed, the unit exits MENU after 10 seconds. disappears
from the display.
Dimmer default value is :
5
.
3) TONE
This function allows to change the RX TONE . 11 steps from
-5
to
+5
Press F key ( 9 ). is displayed.
Long press
F
key (
9
) to
enter
the
MENU .
1. Turn the rotary CH knob ( 6 ) or use UP / DN buttons ( 13 ) on the microphone
to select the menu.
2.
Press
EMG
key (
5
) to
validate.
The current value blinks on the display.
3. Turn the rotary CH knob ( 6 ) or use the UP/DN buttons ( 13 ) on the microphone
to
change
the value of the tone.
4. Short press the EMG key ( 5 ) to validate . a) Return to the point 1 to set an-
other menu or b) Short press the F key ( 9 ) to validate and exit the MENU .
disappears from the display.
5. If no key is pressed, the unit exits MENU after 10 seconds. disappears
from the display.
Tone default value is :
0
4) KEY BEEP
When the function is activated, a beep sounds when a key is pressed, by
changing the channel etc.
“BP”
appears on the display when the function
is active.
Press F key ( 9 ). is displayed.
Long press
F
key (
9
) to
enter
the
MENU .
1. Turn the rotary CH knob ( 6 ) or use UP / DN buttons ( 13 ) on the microphone
to
select
the menu.
2. Press EMG key ( 5 ) to validate. The current value blinks on the display.
3. Turn the rotary CH knob ( 6 ) or use the UP/DN buttons ( 13 ) on the microphone
to
activate
(
on
) /
deactivate
(
of
) the function.
4. Short press the EMG key ( 5 ) to validate . a) Return to the point 1 to set an-
other menu or
b)
Short press the
F
key (
9
) to
validate
and
exit
the
MENU
.
disappears from the display.
5.
If no key is pressed, the unit
exits MENU
after 10 seconds. disappears
from the display.
Default KEY BEEP is
On
.
5) ROGER BEEP
When the function is active, the icon appears on the display.
The Roger Beep sounds when the PTT switch ( 11 ) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a “simplex” communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said “Roger” in order to prevent his correspondent that
it was his turn to talk. The word “Roger” has been replaced by a significant
beep. There comes “Roger beep” from.
Press
F
key (
9
). is displayed.
Long press F key ( 9 ) to enter the MENU .
1. Turn the rotary CH knob ( 6 ) or use UP / DN buttons ( 13 ) on the microphone
to
select
the menu.
2. Press EMG key ( 5 ) to validate. The current value blinks on the display.
3.
Turn the rotary
CH
knob (
6
) or use the
UP/DN
buttons (
13
) on the microphone
to activate ( 1
to
6
*) /
deactivate (
OF
) the function.
4. Short press the EMG key ( 5 ) to validate . a) Return to the point 1 to set an-
other menu or
b)
Short press the
F
key (
9
) to
validate
and
exit
the
MENU
.
disappears from the display.
5.
If no key is pressed, the unit
exits MENU
after 10 seconds. disappears
from the display.
*6 roger tones for ROGER BEEP .
Default
ROGER BEEP
is
OF
.
English