11
SKIP
(long press only if the
SCAN
function is activated)
This function allows you to
skip
a channel found by the
SCAN
function. When the scan stops on an unwanted
channel, press and hold the
ANL/NB
key (
6
) for 1 second
to
store
this channel in the
SCAN SKIP memory
. A beep
sounds. The channel will no longer be scanned.
See the
§
SCAN
page 9.
Consult the
SCAN SKIP
menu page 15
.
7) AM/FM ~ VOX SET
AM/FM
(short press)
This key allows you to
select
the modulation mode (
AM
or
FM
). Your modulation mode has to correspond to
the one of your correspondent. Corresponding mode
appears on the display.
-
Amplitude Modulation / AM:
communication on a field
with relief and obstacles at middle distance (the most
used).
-
Frequency Modulation / FM:
for nearby communications
on a flat open field.
VOX SET
(long press)
Three parameters allow to
adjust
the
VOX
function:
Sensitivity:
/ Anti-vox level:
/ Vox delay time:
.
Long press the
VOX
key (
7
) to
enter
in the
VOX Adjustment
function. The message show the current parameter :
,
or
.
1.
Press then
VOX
key (
7
) to
select
the next parameter or...
2.
Press the
UP
/
DN
key on the microphone or the
s
/
t
key
(
3
) on the unit to
change
the value of the parameter.
3.
Once the settings done, press the
PTT
switch (
11
) to
save
and
exit
the
VOX Adjustment
mode. If no adjustment
is made for 5 seconds, the unit automatically
exits
the
mode without saving.
-
Sensitivity
“
”
: allows the adjustment of the microphone
(original one or optional vox) for an optimum transmission quality.
Adjustable level from
1
(high level) to
9
(low level).Default value:
2
.
-
Anti-Vox
“
”
: allows disabling the transmission generated
by the surrounding noise. The level is adjustable.
OF
(according
the squelch level) and from
0
(without anti-vox) to
9
(low level).
Default value:
Of
.
-
Delay
time
“
” : allows avoiding the sudden cut of the trans-
mission by adding a delay at the end of speaking. The level is
adjustable from 1 (short delay) to 9 (long delay). Default value:
1
.
The
V
ox Adjustment
does not automatically active the
VOX
function.
See the §
VOX
on page 12
to
activate
/
deactivate
the
VOX
function
.
8) EMG
(short press)
An emergency channel is selected by pressing the
EMG
Key (
8
).The unit returns to
CB
mode
(see §
CB/WX
page
10).
First short press to
call
the first emergency custo-
misable channel (or the default channel 9 AM).
“
”
appears on the display. Second short press to
call
the
second emergency customisable channel (or the default
channel 19 AM).
“
”
appears on the display. Third
English