PrePRESS PANTHER PRO/46, Техническое руководство

Страница: 8 / 148

PantherPro/46 Image Recorder TP8251
October 1995 PrePRESS SOLUTIONS CONFIDENTIAL 1-3
The supply cassette cover includes two magnetic interlock switches which are mounted and
connected in series so that if the access door is lifted, both switches open to open the
interlock circuit. When the interlock circuit is open, all power is dropped to the current source
for the laser diode.
All service procedures will be performed with the main power shut off and with the safety
interlock circuit open (no laser diode current).
When performing alignments, carefully follow the procedures documented in the technical
manual. DO NOT defeat the safety interlock switches unless specified in the procedure. Also,
NEVER override the safety interlock switches if the polygon/motor assembly is not spinning,
as this could allow the focused beam to be emitted.
Caution: Direct or indirect reflected eye contact with the laser beam may cause serious
eye damage.
Warning: At no time should the unit be left unattended with the interlocks defeated.
The following safety precautions should always be observed:
1. Never operate the unit with the optics cover removed.
2. Laser safety goggles must be worn when making any adjustments to the recorder with the
interlocks defeated.
3. Any adjustments that are to be made with the interlocks defeated must be made in a
secure area, with only trained personnel present.
4. Do not place screwdrivers or other shiny objects in the path of the laser beam.
5. Remove all jewelry from fingers and wrists before making any alignments.
6. Remember that the laser beam may cause permanent damage to the eyes.
1-3 Regulatory Agencies Information
The PantherPro/46 is an approved product designed and manufactured in accordance with
UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards. The
product also complies with the requirements in Part 15 of FCC Rules for a Class A computing
device.
This equipment complies with the requirements in part 15 of FCC Rules for a Class A
computing device. Operation of this equipment in a residential area may cause unacceptable
interference to radio and TV reception requiring the operator to take whatever steps are
necessary to correct the interference.
The PantherPro/46 image recorder also complies with specific European safety standards;
International models are shipped with a label bearing the “CE” mark. This label demonstrates
compliance with IEC safety standards. The PantherPro/46 also meets EN55022/VDE Class B