Accent 1400 User’s Guide-Empower
27
2.
Press the tabs at the top of the frame into the slots in the top of the
device.
3.
Pull out the sides of the frame and fit them over the edges of the
device.
4.
Pull out the tabs on the bottom of the frame and fit them over the
bottom edge of the device.
5.
Press hard on each side until all sides of the frame fit tightly against
the device.
Attaching the Device Frame More Securely
If you do not expect to remove and reattach the frame to the device
frequently, you may want to insert the original screws at the top and
both sides of the frame. If you expect to remove and reattach the frame
to the device frequently, you may not want to use the screws.
1.
Place the device face down on a flat surface.
2.
Insert the two screws that have wood-style threads through the holes
in the top of the frame and into the corresponding holes in the top
of the device.
3.
Insert the remaining four screws through the holes in the sides of
the frame and into the corresponding holes in the device.
4.
Tighten all six screws with a Phillips screwdriver.
After you attach the frame securely to the device, you can attach a
keyguard or TouchGuide to the frame.
Step 2
Insert the two screws that
have wood-style threads
Step 3
Step 3
