Accent 1400 User’s Guide-Empower
21
Positioning or Removing the Stand
Do not carry the device by the stand. When carrying the device, use the
handle or carry strap.
You can use the stand in either the closed or open position, or you can
remove it completely.
Opening the Stand
The stand in the latched position provides a slight angle for viewing the
screen when the device is sitting on a flat surface. When the user needs
an additional angle, extend the legs of the stand away from the back of
the device by doing the following:
1.
Place the device face-down on a flat surface.
2.
Snap the stand’s bottom support loose from its latches on the back
of the device.
3.
Rotate the stand away from the back of the device until the legs
latch into place.
Removing the Stand
If you do not want to use the stand, you can remove it from the back of
the device. You can reattach it at any time.
1.
Place the device face-down on a flat surface.
2.
Remove the screws from the holders at the end of each of the
stand’s legs.
3.
Pull the holders free and put them in a safe place in case you need
to use them later.
Loose holders could be a choking hazard.
4.
Spread the legs apart to pull them out of the holes in the back of
device.
5.
Pull the stand free and put it in a safe place in case you need to use
it later.
Important!
If you reattach the stand, be sure to secure the legs with
the holders to prevent someone from pulling it loose accidentally.
