Premium Leisure Sterling Leisure, Руководство пользователя

Страница: 49 / 76

Page 49
For HELP, call 727.573.9611
T r o u b l e s h o o t i n g
If a problem arises, you can check this list for a quick solution. If this does not
resolve your problem, please call our customer care center, at 727.573.9611.
Additional information is also available at www.PremiumLeisure.com. You will
need your serial number to access this site.
Important – Most problems can be quickly resolved by resetting the
GFCI breaker. Try this first before proceeding.
XP1 and XP2 Troubleshooting
PROBLEM CAUSE SOLUTION
Breaker trips
Wiring error Spa Neutral wire not connected to GFCI
(connected to Neutral bus)
Wrong GFCI GFCI breaker is wrong size. For XP1 and
XP2 ensure you use the included Siemens
GFCI breaker.
Dirty filters Thoroughly clean filters. If problem persists,
oils may have accumulated in the hot tub.
Flush and rinse plumbing. Drain and
thoroughly clean shell (see pages 60).
Foamy Water Soaps, skin
oils, or
undissolved
sanitizer
particles Close the air control valves and allow
filtration cycle to run
Add defoamer
Drain and clean hot tub
Clean or change filters
Rinse all bathing suits before bathing
Leak Loose
connection Check and hand-tighten unions at heater &
pumps, or clamps on jets
Drain open Close drain valve or replace cap
Light doesn’t LED burnt out Replace LED light
work
Loose wire Check wiring harness to LED
Loose plug Reseat L1 plug on hot tub pack
Low/no jet Air lock Bleed air from the system (page 47)
pressure Dirty filter Check and clean or replace filter
Closed jets Open all jets by turning CCW
Closed valves Open all T-handle shutoff valves on heater
and pumps
ACV open Close air control valves
Low water Fill hot tub 1” above all jets
Moved my hot
tub and now it
Wiring error at
GFCI Check Neutral wiring of GFCI (see diagrams
on pages 10-21)