HB4 Series LED High Bays
HB4-100X-X-B
|
HB4-150X-X-B
HB4-240X-X-B
|
HB4-300X-X-B
1
INSTALLATION INSTRUCTIONS
IMPORTANT
Before assembling your fixture,
please make sure that you carefully
read through this instruction sheet.
Ensure your fixture is installed by a
qualified licensed electrician.
Note
: The important safeguards and
instructions that appear in this sheet
are not meant to cover all possible
conditions and situations that may
occur. It must be understood that
common sense, caution, and care
are factors that cannot be built into
any product. These factors must be
supplied by the person(s) caring for
and operating the fixture.
HB4
-
SERIES
LED HIGH BAYS
For use with:
WHAT’S IN THE BOX
•
HB4 LUMINAIRE
•
HOOK AND EYEBOLT
•
PRE-INSTALLED 10’ WIRE
WHAT YOU’LL NEED
•
CHAIN OR CABLE TO MECHANICALLY
SUPPORT LUMINAIRE
•
REFLECTOR (OPTIONAL ACCESSORY)
•
Ensure that the input voltage matches that of the
luminaire.
•
To avoid electrical shock or component damage,
disconnect power before attempting installation or
servicing.
•
This product must be installed in accordance with the
national electric code (NEC) and all applicable federal,
state/provincial and local electric codes and safety
standards.
•
Any alteration or modification of this product is expressly
forbidden as it may cause serious personal injury, death,
property damage and/or product malfunction.
•
To prevent product malfunction and/or electrical shock this
product must be properly grounded.
WARNING
PREMISE LED Inc.
80-86 Carrier Drive
Toronto, ON Canada
M9W 5R1
PREMISELED.COM
