2.Configuration before application
For Windows Vista or Windows 7 system, please follow the steps below to setup
1
Click “Start
Control Panel
Network
and Internet
Network and Sharing
Center
Change adapter settings
Local Area Connection” Select “Wireless
Network Connection”, right-click it and
select “Properties”
→
→
→
→
→
2
Select “Internet Protocol Version 4
(TCP/IPv4)” and click “Properties”
3
Set IP address as 192.168.16.X(X should be
a numeral between1 to 253), subnet mask as
255.255.255.0, then click “OK” to return back
the last page, click “OK” once again.
VER:1.0
A.Local network settings
2
Select an item in the “Wireless Network
Connection” list to connect a wireless
network, and then click "connect"
1
An icon of “
”will appear at the
bottom corner of your computer after
installation of this pocket router , then
click the icon
right
B
.
Wireless settings
3
When there shows "Connected" on the screen,
it means your computer has accessed to
wireless network successfully
http://192.168.16.254
1.Open the web browser, input the default address: 192.168.16.254
in address bar, then press “
Enter
”
2.Input user name and password, default value are all “admin”, and
then click “
OK
”
C.Login the wireless router Web Server
If the Base Station (BS) is encrypted, then please input the password.
It turns out to be a green icon “
” if connected successfully
When
works in AP mode, there are two operating modes:
Wireline connection and wireless connection
Mini Travel Router
2
POW
ER
LAN
WIF
I
1
RT Client AP
POW
ER
LAN
WIF
I
RT Client AP
1.Log in the management interface, spread "wireless network settings" item
on the left menu and click "AP client"
In AP mode,choose "enable" option in the drop-down list, then click "enable"
button to enable client function
(Please note that under condition of exchanging wireline to wireless access, it is better to disable
“AP client” function)
2.Click “Site Survey” of the menu on the left, select the connecting access point and
then click “connect”
Click “scan” if the connecting access point is not on the list
3.Information of system wireless access point will appear automatically,
if your wireless access point is encrypted,You only need to set the same
"Encryption Type" and "Pass Phrase"of the two devices .
4.Menu turns out to be as follows if connected successfully
!!
Tip:
After you connect the wireless successfully through web management of this device, please re-configure the Local Area Network IP address of the computer according to
the connected wireless access point. If the connected wireless network can assign the IP address to users dynamically, then set the IP and DNS address of the computer
as “Obtain an IP address automatically” and “Obtain DNS server address automatically”If it requires static IP, then you can only access the company(home)LAN or Internet
by setting the IP address and DNS address of the computer according to real application.
3.Operation mode configuration
AP
mode
Exchange of wireline access to wireless access configuration
When the wireless hotspot cannot cover effectively, you can also connect to Wireless Pocket
Router by wired connection or wireless connection way. log in the management interface and
configure according to steps on the right, then connect to the existing wireless hotspot.making
2
POW
ER
LAN
WIF
I
RT Client AP
POW
ER
LAN
WIF
I
RT Client AP
1
Switch
W ireless signal amplification/relay settings
It is plug and play for this application, there
'
s no need to configure on management interface. Connect the
cable from switch of wired internet with the Ethernet port of this pocket router, with power
supply
it
will
start
working.
Internet
Protocol
Version
4
(
TCP
/
IP
v4
)
Properties
G
eneral
Alternative configuration
You can get IP settings assigned automatically if your network supports
this capability, Otherwise, you need to ask your network administrator
for the appropriate IP settings.
Obtain an IP address automatically
Use the following IP address:
Obtain DNS server address automatically
Use the following DNS server address:
Validate settings upon exit
Advanced
...
O
K
C
ancel
IP
adress
:
Subnet mask
:
Default
gateway:
Preferred
DNS server:
Alternate
DNS
server:
？
W
ireless Network Connection Properties
This connection uses the following items
:
Client for Microsoft Networks
QoS Packet Scheduler
File and Printer Sharing for Microsoft Networks
Internet
Protocol
Version
6
(
TCP
/
IP
v6
)
Link-Layer Topology Discovery Mapper
/
I O Driver
Link-Layer Topology Discovery Responder
Instal
..
.
Uninstall
Properties
Transmission Control Protocol/Internet Protocol. The default
wide area network protocol that provdes communication
across diverse interconnected networks.
D
escnption
O
K
Cancel
Connect
using
:
N
etworking
Configure
...
802
.
11
n
USB
Wireless
LAN
Card
Internet
Protocol
Version
4
(
TCP
/
IP
v4
)
W
ireless Network Connection
WA01
WP03
-
N1
WH01
-
G1
WP02
Open Network and Sharing Center
WH02
-
G2
MG02
MP01
Internet
access
C
onnected
8
:
08
2011-09-18
)
)
MP01
Open Network and Sharing Center
8
:
08
2011-09-18
)
)
N
ot connected
Connections are available
W
ireless Network Connection
MP01
Information sent over this network
might be visible to others.
C
onnect automatiically
Connect
WA01
WP03
-
N1
WH01
-
G1
WP02
W
ireless Network Connection
WA01
WP03
-
N1
WH01
-
G1
WP02
Open Network and Sharing Center
WH02
-
G2
MG02
8
:
08
2011-09-18
)
)
MP01
N
ot connected
Connections are available
W
ireless Network Connection
Acquiring
network
address
802
.
11n
USB
Wireless
Lan
D
isable
S
tatus
D
iagnose
B
ridge
Connections
C
reate
Shortcut
D
elete
R
ename
P
roperties
C
onnect
/
Disconnect
WiFi-150M Router
W
izard
I
nternet
Settings
W
ireless
Settings
B
asic
A
dvanced
Security
W
D
S
WPS
A
dministration
AP
C
lient
S
ite
S
urvey
S
tation
List
A
P
S
etting
You
could
turn
on
or
turn
off
AP Client feature
A
P
Client
feature
Settings
AP
Client
Enabled
A
pply
C
ancel
A
P
C
lient Parameter
S
SID
M
AC
Address (Optional)
S
ecurity
Mode
BL
-
WA02
48
:
02
:
2a
:
80
:
38
:
20
WPA2
-
PSK
E
ncryption
Type
AES
P
ass Phrase
Tt
&
13 1 4
s e
A
pply
C
ancel/Refresh
S
ave
O
K
C
ancel
Remember my credentials
admin
●●●●●
The server 192.168.16.254 at Welcome to Wireless 11N router requires a
username and password.
W
arning
:
T
his
server
is
requesting
that
your
username
and
password
be
sent in an insecure manner(basic authentication without a secure
connection).
W
indow
S
ecurity
WiFi-150M Router
W
izard
I
nternet
Settings
W
ireless
Settings
B
asic
A
dvanced
Security
W
D
S
WPS
A
dministration
AP
C
lient
S
ite
S
urvey
S
tation
List
Connect
scan
S
ite
Survey
SSID
BSSID
RSSI
Channel
Encryption Authentication
WiFi-150M Router
W
izard
I
nternet
Settings
W
ireless
Settings
B
asic
A
dvanced
Security
W
D
S
WPS
A
dministration
AP
C
lient
S
ite
S
urvey
S
tation
List
Connect
scan
S
ite
Survey
SSID
BSSID
RSSI
Channel
Encryption Authentication
A
C
B
D
E
F
G
H
Quick Installation Guide
Mini Travel Router
Internet cable
OUTLET
Internet
cable
OUTLET
Cable network
interface
Articles to check:
●
Wireless Pocket Router
●
DC adapter
●
RJ-45 cable
●
USB cable
●
Quick Installation Guide
WA02
WP02
WH01
-
G1
WP03
WH01
-
N1
WP02-N1
WA01
WH02
WA02
WP02
WH01
-
G1
WP03
WH01
-
N1
WP02-N1
WA01
WH02
Note:
1.In router and client modes, please set IP address and DNS address of your
computer as “Obtain DNS server addressautomatically”.
2.
In client mode, please set the IP address of local wireline network, connect
with Wireless Pocket Router by wireline connection way, then login the
management interface.
3.In AP mode, if IP address can be assigned dynamically in wireline network,
please set IP address and DNS address of your computer as “Obtain an IP
address automatically” and “Obtain DNS server address automatically”
,
if it
adopts specified static IP, then please configure IP address and DNS address
by manual setting.
192.168.16.12
255.255.255.0
192.168.16.254
AP
mode
AP
mode
AP
AP
User can switch to modes of AP, client and router by just switching the button by the side of Wireless Pocket Router, and please note that the mode exchange takes exactly one minute
1.Operating mode selection
Access Point---wired network
exchange to wireless network
Bridge---wireless network
exchange to wired network
Repeater---wireless hotspot
extension and amplification
Wireless access to WAN,
supports PPPoE, dynamic IP,
Static IP. Supports China mobile,
Unicom, China Telecom hotspots
identification access, wireless
hotsport sharing
Acts as Router, access to WAN
with wire, supports PPPoE,
dynamic IP and static IP
<
Router mode>Introductions
is shown in the third section
of <Operation modes settings>
Router mode
AP
mode
<
Wireless signal amplification/
relay settings> is shown in the
third section of <Operation
modes settings>
Operating
mode
Basic function(application)
Hardware connection and
software setup
This wireless pocket router supports quick exchange among AP, Client
and router modes with switch on the side.
<
wireless AP settings> is
shown in the third section
of <Operation modes settings>
Wired router change to
<
Client mode>Introductions
is shown in the third section
of <Operation modes settings>
Client mode
C
onnected
the wireless signal amplified, thus expanding the signal coverage.
Wireless receiver---GGSN
of wireless network exchange
to wired network
