background image

 The following parts are included:

 

• Power Supply

• Four (4) Germicidal Twin H Lamps

 

(packed in lamp boxes)

• Twe

nty

 (20) Sheet Metal Screws

When installing and using this electrical equipment, basic safety precautions

should always be followed including the following:

1. READ AND FOLLOW ALL INSTRUCTIONS.

2.

Always be sure the unit is unplugged during installation or service procedures.

3.

The ultraviolet light produced by the UV lamp is harmful to your eyes.  Do not look directly at

the lamp.  Should it become necessary to view the lamp, use UV-protected safety goggles.

Lors de l’installation et de l’utilisation de cet équipement, des précautions devront être suivies.

1- Lire et suivre les étapes attentivement.

2- Assurez vous de toujours débrancher avant l installation ou le service.

3

-

Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,

veuillez porter les lunettes de soleil contre les rayons U.V.

IMPORTANT: SAFETY INSTRUCTIONS

Important: Instructions de securité

• Four (8) Caution Labels

• Strain Relief Connector

• Alcohol Pad for Cleaning Lamps

• Installation & Maintenance Instructions

MUV7-200QR

MultiVoltage UVC System

  

Installation & Maintenance Instructions

UNPACKING THE UNIT

Each unit is shipped with the germicidal lamps placed in a box with 

protective packaging. When handling lamps take care to not touch 

the glass portion of the lamp with bare hands. Oils from the hands 

can cause “hot spots” which reduce lamp life. Handle by the end 

caps or use a soft cloth. If you accidentally touch a lamp, use the 

alcohol pad included or clean it using a soft cloth dampened with 

rubbing alcohol. The lamp is fragile and proper care must be taken 

when removing from packaging.

Содержание MUV7-200QR








Отзывы: