MU7-50SR
MultiVoltage UVC System
Installation & Maintenance Instructions
UNPACKING THE UNIT
Each unit is shipped with the germicidal lamp placed in a
box with protective packaging. When handling the lamp
take care to not touch the glass portion of the lamp with
bare
hands. Oils from the hands can cause “hot spots” which
reduce
lamp life. Handle by the socket end or use a soft cloth.
If you
accidentally
touch a lamp, clean it using
the included
alcohol cleaning pad or
a soft cloth damp-ened with
rubbing alcohol. The lamp is fragile and proper
care must
be taken when removing from packaging.
The following parts are included:
• Power Supply with remote lamp assembly
• One (1) Germicidal Twin H
Lamp
(packed
in lamp box)
• Eight (8) Sheet Metal Screws
• Two (2) caution labels
• Installation & maintenance instructions
• Strain relief connector
•
Alcohol cleaning pad
When installing and using this electrical equipment, basic safety precautions should always be followed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2.
Always be sure the unit is unplugged during installation or service procedures.
3.
The ultraviolet light produced by the UV lamp is harmful to your eyes. Do not look directly at
the lamp. Should it become necessary to view the lamp, use UV-protected sunglasses.
Lors de l’installation et de l’utilisation de cet équipement, des précautions devront être suivies.
1- Lire et suivre les étapes attentivement.
2-
Assurez vous de toujours débrancher avant l installation ou le service.
3-
Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,
veuillez porter les lunettes de soleil contre les rayons U.V.
IMPORTANT: SAFETY INSTRUCTIONS
IMPORTANT: Instructions de securité
Содержание MU7-50SR
Страница 5: ...Photo C Photo B Photo A...