Vetlab Supplies Ltd Unit 13 Broomers Hill Park Broomers Hill Lane Pulborough RH20 2RY
Telephone 01798 874567 Fax 01798 874787 Email
www.vetlabsupplies.co.uk
Bulb Replacement
Unplug unit from power source. Allow bulb to cool before removal. (It will
become very hot during use).
Loosen the screw knob on the underside of microscope and open the panel to
expose the bulb.
Remove the old bulb.
Important: Do not touch the halogen bulb with bare
hands.
Wear gloves or hold the bulb using tissue or lens paper. Body oils
may damage the halogen bulb.
Hold the new bulb (must be same specification as the old one) with clean
gloves or tissue and vertically insert the pins into the jack.
Close the panel and tighten the thumbscrew knob.
Fuse Replacement
Unplug the unit from power source.
Open the fuse holder with a “
－
” screwdriver in the direction of
the arrow. Remove the old fuse and install a new fuse with the same
specification.
Replace the fuse holder and screw in place.
