8
C
ALL
H
ANDLER
6000 I
NSTALLATION
I
NSTRUCTIONS
Call Handler Modes of Operation
Note: A new unit will not have messages but will behave the same as
described below.
Promo Mode:
The call Handler answers an incoming call on
the programmed number of rings (default is
2). The Call Handler plays a short
promotional message, then the Handler
switches to a transfer message (this may be
the same as the on-hold message) and
begins to ring the inside phone system. When
someone answers the incoming call, the Call
Handler connects the caller to the inside
phone system.
Screen Mode:
The Call Handler immediately begins to ring
the inside phone during an incoming call.
When someone answers the incoming call
the Call Handler connects the caller to the
inside phone system. If the programmed
number of rings (default is 4) is reached
before the inside phone system answers the
call, then the Call Handler answers the
incoming call, plays a short screen message
and then switches to the transfer message.
The call handler continues to ring the inside
phone system while the messages are being
played. When someone answers the incoming
call, the caller is then connected through to
the phone system.
continued next page...
