PREMIER TECH Solido SMART, Руководство по эксплуатации, включая журнал операций, инструкция по установке, вводу в эксплуатацию и техническому обслуживанию

Страница: 8 / 64

1. About this document
Premier Tech 8 / 64 Solido SMART
DOKK5110E 15.04.2020
1. About this document
1.1 Scope
This “Technical Documentation for the Solido SMART SBR Wastewater Treatment System”
refers primarily to the handling of the Solido SMART as a technical configuration of Solido
small wastewater treatment plants.
It is part of a series of technical documents that describe the installation, start-up, operation,
function, maintenance, and repair of Solido small wastewater treatment plants and their
options:
List of applicable documents:
•
Installation and assembly instructions for Solido SMART PE container (DOKK8304E for
BL tanks and DOKK8308E for M2 tanks)
•
Short description of the Solido SMART PE complete system (DOKK5204)
•
Installation manual for Solido SMART pumped outlet (DOKK7314E)
•
Installation instructions for kiosk (DOKK7301)
Solido SMART is used in the container types round tank BL and rectangular tank M2 (also
see brief description DOKK5204E). Its function and technical configuration are dependent on
the type. This documentation uses container BL26 and M2-35 as an example.
Approvals
The Solido SMART wastewater treatment system forms a part of the following plant types,
which have received the approvals listed below from the Deutsches Institut für Bautechnik
(DIBt - German institute for civil engineering):
Product Filtration
level DIBt no. Created on Valid until Doc. no.
Solido SMART C Z-55.31-673 28.07.2016 28.07.2021 DOKK5411
Solido SMART N Z-55.31-674 28.07.2016 28.07.2021 DOKK5412
Solido SMART D Z-55.31-675 28.07.2016 28.07.2021 DOKK5413
The CE declaration of conformity as per EN 12566-3 is available (see the appendix).