WindGarden
b y p r e m i e r d e s i g n s
Sopwith Camel Airplane Spinner
assembly
instructions
Plane Fuselage x 1
Wing x 3
Landing Gear Struts x 2
Spinner Propeller x 1
Landing Gear Wheel Axle x 1
Stabilizer Cross Strut x 1
Ground Stake x 1
Support Pole x 1
A
“T” Fitting
Thumb
Screw
Vertical Support Rod
Diagonal
Plastic Fittings
B
Bottom View
Aluminum
Ferrule
Internal Wing
Strut
Internal Wing
Strut
Left Wing
Right Wing
Velcro Tab
Velcro Tab
Main
Fuselage
Hub
Step 1
Slide the top wing’s “T” Fitting Thumb Screw onto the Internal
Vertical Support Rod. Be sure to tighten the top wing’s “T” Fitting
Thumb Screw to secure the wing to the fuselage. Make sure the
wing is fully seated on the Vertical Support Rod. (diagram A)
Step 2
Insert the Aluminum Ferrule attatched to the Internal Wing Strut
of the Right Wing through the square opening of the Main
Fuselage Hub. Then insert the Left Wing’s Internal Wing Strut into
the Aluminum Ferrule, which is inside the channel of the Main
Fuselage Hub. (diagram B )
Step 3
Secure the wings to the fuselage with the Velcro tabs on both the
top and bottom of the Left and Right Wings. (diagram C)
Main Fuselage
Hub
Fuselage
Velcro Tab
Velcro Tab
Left Wing
Right Wing
C
Bottom View
