A
Step 1
Insert the two Wing Struts through the two
openings at the wing tip of one of the
wings. Guide them through the internal
sleeves sewn inside of the wings. The
longer of the two struts is inserted through
pocket closer to the leading edge of the
wing. (diagrams A & B)
Step 2
Pass the struts through the Channel Holes
in the fuselage, found underneath the
wings and through the Aluminum Channel
inside the fuselage. Guide the struts
through the internal sleeves of the other
wing to the end of the wing tip. This wing
tip should be sewn closed, so the struts can
not pass through. (diagram C)
PK1983
openings in seams of the wing tip
for inserting wing struts
Long Wing Strut
Short Wing Strut
Wing
Wing Strut
Wing Opening
for struts
B
WindGarden
b y p r e m i e r d e s i g n s
Gee Bee Spinner
assembly
instructions
Plane Fuselage x 1
Spinner Propeller x 1
Landing Gear Wheel Axle x 1
Stabilizer Cross Strut x 1
Ground Stake x 1
Support Pole x 1
Wing Struts x 2
C
Bottom of Wing
Channel Holes
Main Fuselage
Hub
Fuselage
Aluminum
Channel
Wing Strut
