WindGarden
b y p r e m i e r d e s i g n s
Island Hopper Airplane Spinner
assembly
instructions
Step 1
Slide the wing “T” Fitting Thumb Screw onto the Internal Vertical Support Rod. Be sure to tighten the Wing “T” Fitting Thumb Screw to secure the wing to the
fuselage. Make sure the wing is fully seated on the Vertical Support Rod. Make sure the engine cowlings are perpendicular to the wing. (diagram A)
Plane Fuselage x 1
Wing with
(2) Engine Cowlings x 1
Spinner Propeller x 2
Stabilizer Cross Strut x 1
Pontoons x 2
Ground Stake x 1
Support Pole x 1
A
Main
Fuselage Hub
“T” Fitting Thumb
Screw
Vertical Support Rod
