AirSpeed
®
Ascent Operator Manual
Tech Service Hotline: 886-904-6979
Original Instruction
s
November 2020
Copyright Pregis Corporation
13
All Rights Reserved
5.3
Fill Mode Adjustments
Pressing the
Fill Mode
button brings up the
Fill Mode Selection
menu.
After desired value is entered, click the
Enter
key and return to the
Home Screen
using the
Back
button.
Continuous Mode
can be activated by entering zero (“0”) for either setting in
Time
or
Length
modes. In this mode, the machine will run until stopped by the user.
5.4
Air Level and Temperature Adjustments
Pressing the
Air Level
button and
Seal Temperature
button opens the
Blower Setting
and
Seal
Drum Setting
menus, respectively.
Figure 19. The Fill Mode Selection menu allows the
user to toggle between length and time per run.
Figure 20. Both length and time per run can be
adjusted by selecting the Run Time
/
Length icon.
Figure 21. Length mode allows the user to select set
length of pillow whenever the Start button is pressed.
Figure 22. Time mode has a similar function, but
run time is determined in minutes and seconds.
Figure 23. Input the desired value, click the Enter key, return to the Home Screen using the Back button.
Back
Button
