PREDATORBOARD C01R, Руководство пользователя

Страница: 4 / 13

Operating your Predator board
Remote Control
The Remote Control has two functions. To turn the Predator board on/off and stabilisation activation.
To turn the Predator board ‘on’ press button 1, to turn ‘off’ press button 2.
Alternatively, the Predator board can be turned ‘on’ and ‘off’ by pressing the button situated at the rear
of the unit.
To activate stabilisation press buttons 1 & 2 together and hold for 5-7 seconds. The riding status
indicator light on the Predator
board display will flash 5 times. The unit is now in stabilisation mode.
Alternatively, the stabilisation mode can be activated by pressing the power button at the rear of the
Predator board and holding for 5-7 seconds. The riding status indicator light will flash 5 times. The
Predator board is now in stabilisation mode.
PLEASE NOTE: Buttons 3 & 4 on the remote control do not have a function (unless Bluetooth is fitted)
Pedal Sensors
The Predator
board
is equipped with four sensors under the foot pad. The sensor controls forward and
reverse movements independently on each pad. Be careful not to step beyond the foot pad.
Display
The display shows the battery status and running mode. The battery symbol is green when the
Predator
board is charged and there is a riding status indicator which is green when the board is
activated by standing on the foot pad and turns red and sounds the alarm when a running error occurs.
TM
4