©2019 Precor Inc. | Seated Dip RSL 215 | Assembly Guide
9
3
Tools: Hex wrench, 8 mm
Socket wrench, 18 mm
Lower pulley back into bracket on arm frame and secure with
hardware removed in
step 1
(one M12 thin nut, two 13 mm wash-
ers, and one M12 x 45 mm SHCS).
4
1 M4 x 3 mm CPHS
Tool: Philips screwdriver
Place front and back pulley covers over pulley and secure.
5
Tools: Hex wrench, 8 mm
Hex wrench, 4 mm
To route the cable around the lower pulley on the weight stack
tower, remove the cable retainer. Route the cable around the pul-
ley and then replace the cable retainer.
6
Tools: Hex wrench, 8 mm
Open-end wrench, 19 mm
Torque wrench
To route the cable to the upper pulleys of weight stack tower,
remove the cable retainers, route the cables, and replace the re-
tainers.
Tighten to 50 ft-lb (67 N-m) of torque.
6
7
43
43
6
7
2
