page 18
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Press Enter once again and the Error Log appears. Press the
▼
or
▲
key to view the
error messages. To return to the Precor banner, press Enter or Reset.
Note: To clear (delete) the error log, press and hold Quick Start for at least four
seconds while viewing the list. Prompts appear on the display and let you know
when the error messages have been deleted (“cleared”) from memory.
Important: You cannot retrieve the error log once you have deleted it.
USING CSAFE STANDARD EQUIPMENT
The EFX556 is fully compatible with CSAFE protocols. If the unit is connected to
a CSAFE master device, the user will be prompted to enter a user ID. Five zeros
appear on the display. The left zero blinks to indicate that it is awaiting input. The
following table provides information about the keypad functions:
User ID Entry: Program Keys
▼
or
▲
moves the blinking LED from field to field.
Number keypad
use the number keys to enter a user ID. The number that is
pressed appears in the display and the next field begins to
blink. When all 5 user ID numbers are selected, the user
must press Enter to submit it.
Enter
submits the displayed user ID. Note that if the 5 zeros are
being displayed when the user presses Enter, the user ID
entry is bypassed and the Course prompt appears.
Reset
resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device.
Then, the Course prompt is displayed. See
Quick Steps to Working Out on page 27.