page 17
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
SETTING A WORKOUT TIME LIMIT
You can limit how long a user works out by setting a duration between 1 and 240
minutes. The EFX also lets you choose “no limit” which allows the user to select a
course and work out indefinitely. (Note that the user must enter a workout time of 0
using the
numeric keys at the Enter Time prompt before he or she can workout
“indefinitely.”)
Important: If the club setting is “no limit” and the user enters “0” at the Enter Time
prompt, then the Time Remaining display does not appear when a user works out.
(An exception to this rule is the Weight Loss Course.)
Note: The Quick Start program is set at the Club limit (see page 24).
Use the
▼▲
keys to select a workout time limit. For example, if you set the workout
time limit to 20 minutes, the EFX allows users to specify a workout between 1 and 20
minutes. Users would not be able to specify a time longer than 20 minutes.
Note: The touch-sensitive keys can be gently pressed and held to view several
selections. The longer the key is held down, the faster the numbers scroll past.
Important: Take into account that the user will get an additional five-minute cool-
down period appended to his or her workout, so adjust the time limit accordingly.
SETTING A PAUSE TIME LIMIT
Setting a Pause time limit is useful because the EFX exits the course and returns to
the Precor banner at a predetermined interval after the user stops pedaling.
Use the
▼▲
keys to set a Pause time limit between 1 and 120 seconds (two minutes).
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION AND ERROR LOG
The display console keys that you need to press to view the odometer, the num-
ber of hours the EFX has been in use, the software version and any error codes,
are as follows:
Reset,
▲
,
▼
Note: The number keys, 6 and 5, may be pressed instead of using the
▲
and
▼
keys, for example: Reset, 6, 5. Remember to begin at the Precor banner. After
pressing Reset, the next key in the sequence must be pressed within ½ second.
The field name Odometer appears briefly and then the odometer value (the cu-
mulative strides that users have travelled) appears.
Press Enter and the number of hours (Hour Meter) that the unit has been in use
appears. The EFX notes the passing of each 10th of an hour, but the numeric
value that appears is truncated to the nearest full hour.
Press Enter again and the unit’s three digit Software Version (upper and lower)
appears on the display.