Precor Experience Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 248

Precor Experience Series Скачать руководство пользователя страница 15

General Information

General equipment and service information that will help you to repair and maintain the
machine.

Features

The equipment operating specifications.

Feature

Specification

Consoles

LED consoles: P30, P30i and P31

Touchscreen consoles: P62 and P82

Movable
CrossRamp

®

levels 1 - 20
range: 10° - 35° incline

Stairarm wheel: Single polyurethane wheel with over-sized axle and
sealed bearings.

Upper Arms

Moving Arms

Resistance

The machine can be fitted with either a single stage hybrid generator /
eddy brake current system or a dual stage 3-phase generator / eddy
brake current system to control the applied resistance levels. The res-
istance specifications are different depending on the type of input drive
system.

Dual Stage Input Drive:
     Levels: 1 - 20
     Resistance min/max specification:
         • min 18 W (level 1 at 40 SPM)
         • max 720 W (level 20 at 200 SPM)

Single Stage Hybrid Input Drive:
Levels: 1 - 20

Resistance min/max specification:

         • min 7 W (level 1 & 40 SPM)
         • max 534 W (level 20 & 200 SPM)
      Maximum SPM resistance levels:
            SPM > 96, max level 20
            SPM 92 - 96, max level 19
            SPM 82 - 92, max level 18
            SPM 72 - 82, max level 14
            SPM 60 - 72, max level 10
            SPM < 60, max level 5

Heart Rate

• Touch Handheld handlebar mounted heart rate sensors.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 7

2 General Information

Features

«
...
13
14
15
16
17
...
»

Содержание Experience Series

























































































































































































































































Отзывы:

Нет отзывов