Active Status Light (ASL)
(Only applies to machines that support the
ASL
1
feature)
About
The Active Status Light (ASL) is a service and maintenance status light that provides a
visual indication of the machine operational status. The current implementation supports
four states: 1) Solid blue - indicates normal operation, 2) pulsing blue - indicates pre-
ventative maintenance is required; 3) Solid yellow - indicates an error has occurred but the
machine is useable; and 4) pulsing yellow - indicates a loss of major function was detected.
The console can be used to control the ASL functions including, settings the light brightness
level, viewing the ASL state, resetting the ASL states, enable/disable the maintenance
reminder, and viewing the maintenance due remaining mileage (or hours), see
ASL Light Equipment Location
On treadmills, the Active Status Light (ASL) is a service and maintenance status light loc-
ated on the front lower center of the front hood cover.
ASL Overview
l
An externally visible indicator of the current machine operational status. There are
four supported states: 1) solid blue - indicates normal operation, 2) pulsing blue - indic-
ates preventative maintenance is required; 3) solid yellow - indicates an error has
occurred but the machine is useable; and 4) pulsing yellow - indicates a loss of major
1
Active Status Light: Service and maintenance status light.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 236
7 Troubleshooting
Active Status Light (ASL)
