Precor Experience 700 line Series, Руководство по обслуживанию

Страница: 170 / 232

ASL State DESCRIPTION
servicing or replacement.
Ellipticals: The maintenance counter starts at 1000 hours and counts
down the active use hours to 0. When the counter reaches zero hours,
the ASL will begin pulsing blue indicating preventative maintenance is
due.
Yellow Solid Indicates an error has occurred, was self-corrected and the machine can
be used. The fault can be cleared.
Yellow Pulsing There is a current non-recoverable fault condition, there is a loss of a
major function and the machine is out-of-service. Machine service is
required.
ASL Settings and Functions
Setting the ASL light brightness level
The ASL Light Brightness level settings are HIGH, MEDIUM, and LOW. On P10, P20, and
P30 consoles, the light brightness level can be switched OFF.
l
On P10, P20, and P30 consoles, the OFF setting switches the ASL light brightness OFF
for all ASL state conditions. Setting the ASL Light Brightness OFF only switches the
ASL light brightness OFF and not the ASL active status functionality.
l
Regardless of the brightness level setting (including OFF), you can view the current
ASL state (blue, yellow, etc.) in the service access menus, see
"Viewing the current
ASL state" on the facing page .
P10, P20, and P30 consoles:
Access Hardware Validation ( 5,1,7,6,5,7,6,1) > AS LIGHT BRIGHTNESS > select HIGH,
MED, LOW, or OFF.
P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > AS LIGHT BRIGHTNESS >
select HIGH, MED, or LOW.
Disabling the ASL Maintenance Reminder
When set to ON, the ASL maintenance reminder - pulsing blue light state is triggered ON
when the maintenance counter counts down to zero miles (or zero hours). When set to OFF,
the ASL Maintenance Reminder counter is ignored and the ASL state is not changed to
pulsing blue.
Page 162
6 Troubleshooting
Active Status Light (ASL)