PRECITEC Lasermatic LightCutter, Руководство по эксплуатации

Страница: 59 / 82

5 Maintenance
D 159195 © Precitec GmbH & Co. KG • EN 09/2019
5 - 49
5.6.2 Replacing the sensor insert
Fig. 5-7 Maintenance: Sensor insert
(replacement)
Removing the sensor insert
You
must
have a new sensor insert
(SE)
ready at hand before you start
replacing the old one.

Unscrew the nozzle, undo the screws and remove the ceramic part.
An adjustable hook spanner size 40/42 (available as an accessory) can be used for easy
removal of the nut.
F200 (2 x VA)
SE100
6
LC-BA-oSE1
1
2
3
4
5
F150 (1 x VA)
1 Nozzle
DE CON
, ceramic part
KT
4 Sensor insert
SE100
2 O-ring
(Ø26.00 x 1.50 Viton)
5 Protective window module
3 Spatter protection plate
PP
6 Extension adapter
VA
1.
Undo the screws
(2x
hexagonal screws SW7
)
and remove the spatter protection plate (3).
2. Undo the fixing screws
(4x
Allen screws SW5
)
and remove the sensor insert (4).
Note:
Depending on the version, up to two extension adapters are fitted.