PRECITEC Lasermatic LightCutter, Руководство по эксплуатации

Страница: 13 / 82

1 Basic safety notes
D 159195 © Precitec GmbH & Co. KG • EN 09/2019
1 - 3
1.3 Intended use
The
laser head
has been designed for integration into a laser cutting machine.
The laser head is used for cutting metals with solid-state and diode lasers.
Only use the product in dry working environments. The products / units must
only be operated in compliance with the specifications stated in the Technical
Data sheet.
Electromagnetic
compatibility (EMC)
Both as a standalone device or in combination with the relevant devices and
cables stated in this documentation, the
laser head
complies with the
EN 61000-6-2 and EN 61000-6-3 standards as specified in the current EMC
Directive. It is intended for industrial use.
It is possible that these standards may not be met when using units or cables
provided by the client. Only use the parts / units supplied or original spare
parts and adhere to the instructions in the accompanying manuals relating to
EMC-compliant installations.
If the product / unit is integrated into a system and operated together with
other units, the whole system must comply with the current EMC Directive so
that a general operating permit can be granted.
1.4 Basic standards
Below you will find a summary of basic German and international standards
and regulations that apply to Precitec products.
Precitec does not guarantee that this summary is complete.
DIN VDE 0100
Regulations for setting up power current installations with rated voltages
up to 1000 V
DIN EN 207
Personal eye protection: Filters and eye protectors against laser radiation
(laser goggles)
DIN EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and risk
reduction
DIN EN 60204-1
Safety of machinery: Electrical equipment of machines,
Part 1: General requirements (IEC 60204-1)
DIN EN 60825-1
Safety of laser machines: Part 1 (IEC 60825-1)
DIN EN 61000-6-2/ -6-3
Electromagnetic compatibility
(EMC)
(IEC 61000-6-2/ -6-3):
Generic standards on interference emission/immunity, Part 2: Industry
BGV A3
Accident prevention regulation: Electrical systems and equipment
BGV B2
Accident prevention regulation: Laser radiation
Any use which deviates from that which was originally intended is regarded as
improper use. Precitec shall not be liable for any damage caused by the
improper use of the unit.