STEP 2
Wiring the speakers
Note:
Please turn off your system prior
to making any connections.
To wire your system, please use good quality,
speaker grade audio cable with polarity coding
(usually identified with a marking on the
cable) as per the gaugerecommendations
indicated below. The side of the cable that has
the coding (a ridge, or "+" marking) usually
denotes the positive polarity.
Connect the positive lead of the speaker wire (indicated with a "+" or other
marking) to the Red (or positive) speaker terminal. Connect the other speaker
wire lead to the Black (or negative) speaker terminal. Connect the opposite end of
the speaker wire to your amplifier making sure that the polarity is preserved ("+"
to "+" or Red to Red, and "-" to "-" or Black to Black – see diagram).
STEP 3
Listening Test
Once you have connected your speakers,
turn on your system and begin playback
of material you are familiar with. Begin
at low volume and increase to a
comfortable listening level. The system
should sound balanced with good stereo
imaging. If the imaging sounds distorted
and confused, check to make sure that
the speakers have been correctly wired
with your amplifier/receiver as indicated
in Step 2.
Maintenance
Your Precision Acoustics loudspeaker
cabinets are finished with a high quality
vinyl that requires very little
maintenance. Simply use a damp cloth
to remove dust and fingerprints, and
avoid all use of chemical products and
polishes on the cabinet and grille.
