background image

© 2017 Precision Lighting Ltd.    We reserve the right to change details of design, materials and finish.    Version   02.17

33

H

A

B

Module

D

C

E

F

G

Opti
c

K

L

Adjustabilit

y

Housin

g

I

J

M

N

Inser
t

1.  All systems must be installed by a suitably 

qualified  professional  only.  Installations 
must  conform  to  national  installation 
and accident prevention regulations.

2.  Ensure that the luminaire is switched off at 

mains supply before installing or removing.

3.  Do  not  install  IP20  luminaires    in  a 

damp  or  wet  location.  Do  not  install 
any  fixture  closer  than  150mm  (6 
inches) from any combustible material. 

4.  To reduce the risk of fire and burns, do 

not install these systems where exposed 
bare  conductors  can  be  shorted  or 
contact any conductive materials. Do not 
conceal or extend exposed conductors 
through a building wall.

5.  Ensure  all  connections  are  tight.  Bad 

connections  can  cause  overheating, 
arcing and a potential fire risk. 

6.  Wire supply connections must be made 

with U.L or compatible testing agency-
approved  connectors.

 

Always  use 

appropriate optics and ensure they are 
fitted securely.

7.  Install and use only as described in this 

Precision Lighting manual. 

8.  Use  Precision  Lighting  recommended 

optics and accessories only. 

9.  Luminaires  may  be  hot,  allow  to  cool 

before touching.

10.  Access  to  serviceable  electrical 

components  should  be  kept  available 
for maintenance purposes. 

11.  Regular  cleaning  of  these  products  is 

important.  Switch  off  at  mains  supply 
and  allow  to  cool  before  touching. 
Clean  fittings  with  a  microfibre  cloth. 
Then reconnect the power supply.

KEY PRODUCT FEATURES

11 Series Module

16 Series Module

9 degree Optic

11 degree Optic

15 degree Optic

25 degree Optic

45 degree Optic

Honeycomb Louvre

Standard Housing

Trimless Housing

Tilt ring

Fixed ring

Decorative Insert

Pinhole Insert

instruction manual

Minimo 11/16 Pro

Minimo 11/16 Pro is a miniature recessed 
92 CRI LED luminaire offering 360º pan with 
35º tilt.
 
Minimo 11 Pro   

6W 

513lm

Minimo 16 Pro   

8.4W  

665lm

These instructions cover procedures for all 
versions of Minimo 11 & 16 Pro with bezels 
including: 
Fixed and adjustable configurations
Chamfered and flat bezel configurations
Decorative and Pinhole apertures
IP20 and IP54 configurations
Trimless configurations

Отзывы: