PRECISION DIGITAL PD8-7000 Series Скачать руководство пользователя страница 24

Страница: 24 / 58

ProtEX-MAX PD8-7000 Explosion-Proof Temperature Meter Instruction Manual

MeterView

Pro Software

The meter can also be programmed using the PC-based MeterView Pro software included with the meter.

This software can be installed on any Microsoft® Windows® (XP/Vista/7/8/10) computer by connecting

the meter’s onboard USB. The meter is powered by the USB connection, so there is no need to wire any-

thing prior to programming the meter, though USB is intended only for meter configuration.

MeterView Pro Installation

Connect one end of the provided USB cable to the internal electronics module and the other end

to the computer. The computer will automatically install the driver software it needs to talk to the

meter.

Only one meter may be connected at a time. Attaching mul-

tiple meters will cause a conflict with the meter software.

Once the driver is installed, an AutoPlay dialog should appear

for the drive “MAINSTAL.” Click “Open folder to view files.”

If the computer does not display an AutoPlay dialog for the

drive “MAINSTAL,” you should open My Computer and double-

click on the drive labeled “MAINSTAL.”

Double-click on the file named “MAStart.” The program will

open a few windows and install two programs on your com-

puter. Simply follow the onscreen instructions until you see

one of the dialogs below. If you receive a “User Account Con-

trol” warning, click “Yes.”

If there is an update available, click the “Update” button to in-

stall the new version. Otherwise, click “Configure” to begin pro-

gramming your meter.

Note:

If you decide to update your MeterView Pro software, once the installation has completed, you

will be asked if you want to update the setup files located on the meter itself. This way, you will always

have the most current version on the meter for future installs.

Warn-

ing!

Do not unplug the meter while the new installation files are being written to it. The

meter will display

uwrite

during the process and you will receive an onscreen noti-

fication once the process is complete.

Data logging for one meter at a time is available with MeterView Pro software. More advanced data ac-

quisition may be accomplished by using any Modbus RTU compliant software. Additional information re-

garding configuration and monitoring of the meter using MeterView Pro software is available online.

Go to

www.predig.com/meterview-pro

Содержание PD8-7000 Series



























































Результаты поиска

Содержание PD8-7000 Series

Отзывы:

Похожие инструкции для PD8-7000 Series

Бренды по названию

Популярные бренды

PRECISION DIGITAL PD8-7000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание PD8-7000 Series

Отзывы:

Похожие инструкции для PD8-7000 Series

Бренды по названию

Популярные бренды