PRECISION DIGITAL PD6701, Инструкция по эксплуатации

Страница: 14 / 23

PD6701 Field-Mount Loop-Powered Feet & Inches Level Meter
Instruction Manual
14
Configuring the Lower Display
(
DISPLAY
)
The lower display may be configured to display a
custom tag (
TAG
), volume (
VOLUME
), volume and tag
( VOL
+
TAG ), percent of full height (
PCT HT
), or percent
of full height and tag (
PCT
+
TAG
) or be blank (
OFF
).
A custom tag may be up to seven alphanumeric
characters programmed for identification (e.g.
TANK
3
) or for engineering units (e.g.
GALLONS
).
Volume is a separate, second scale of the input
process variable. This is configured in
Volume Display
Scaling (
VOLSCAL
) on page 17 .
Percent full height shows the percent full of the tank
height level indicator programmed in the
Scaling the
Tank Level Indicator (
PERCENT
) menu, on page 13 .
The tank level indicator (
GRAPH
) may also be turned
on or off from the display menu.
Setting the Tag ( TAG )
Any lower display setting that includes a tag will
require the tag to be entered.
The fully alphanumeric values for the tag are set
using the
RIGHT button to select the digit, the UP and
RIGHT arrow buttons to select the digit reading, and
the ENTER button to confirm and select the next digit.