P
RO
V
U
PD6210 Analog Input Batch Controller Instruction Manual
39
Reset Menu (
reset
)
The
Reset
menu is used to reset the total, grand totals, batch count, maximum, or minimum reading
(peak or valley) reached by the process; both maximum and minimum may be reset at the same time by
selecting “reset high & low” (
rst HL
).
Control Menu (
Contrl
)
The
Control
menu is used to control the 4-20 mA analog output and the relays manually, ignoring the
input. Each relay and analog output can be programmed independently for manual control. Selecting
automatic control sets all relays and analog output for automatic operation.
Setting Up the Password (
pass
)
The
Password
menu is used for programming three levels of security to prevent unauthorized changes to
the programmed parameter settings and to program the non-resettable totalizer.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset points
Pass 3: Restricts all programming, function keys, and digital inputs.
Total Password: Prevents resetting the total manually
Gtotal Password: Prevents resetting the grand total manually
Protecting or Locking the Controller
Enter the
Password
menu and program a six-digit password.
For instructions on how to program numeric values see
