P
RO
V
U
™ PD6262 Dual Analog Input Rate/Totalizer
Instruction Manual
40
Advanced Features Menu
To simplify the setup process, functions not needed
for most applications are located in the
Advanced
Features
menu.
Press and hold the Menu button for three seconds to
access the advanced features of the meter.
Advanced Features Menu &
Display Messages
The following table shows the functions and
messages of the
Advanced Features
menu in the
order they appear in the menu.
Advanced Features Menu & Display Messages
Display
Parameter
Action/Setting
filtEr
Filter
Set noise filter value
Ch-A
Channel A
Set filter value for
channel A
Ch-b
Channel B
Set filter value for
channel B
bypASs
Bypass
Set filter bypass value
Ch-A
Channel A
Set filter bypass value
for channel A
Ch-b
Channel B
Set filter bypass value
for channel B
Round
Round
Set the rounding value
for display variables
seriAl
Serial
Set serial
communication
parameters
SlaVId
Slave ID
Set slave ID or meter
address
Baud
Baud rate
Select baud rate
Tr dLY
Transmit delay
Set transmit delay for
serial communication
Parity
Parity
Select parity
Even, Odd, or None
with 1 or 2 stop bits
t-byt
Time byte
Set byte-to-byte timeout
SelEct
Select
Enter the Select menu
(function, cutoff, out)
Functn
Input signal
conditioning
Select linear, square
root, programmable
exponent, or round
horizontal tank function
Advanced Features Menu & Display Messages
Display
Parameter
Action/Setting
Ch-A
Channel A
Select menu for
channel A
Ch-b
Channel B
Select menu for
channel B
Linear
Linear
Set meter for linear
function and select
number of linearization
points
No pts
Number of
points
Set the number of
linearization points
(default: 2)
Square
Square root
Set meter for square
root extraction
Prog E
Programmable
exponent
Set meter for
programmable
exponent and enter
exponent value
nmath
Math
Enter the setup menu
for channel C math
functions
Sunm
Sum
C = (A+B+P)*F
Dif
Difference
C = (A-B+P)*F
difabs
Absolute
difference
C = ((Absolute value of
(A-B))+P)*F
AVg
Average
C = (((A+B)/2)+P)*F
nmulti
Multiplication
C = ((A*B)+P)*F
DiVide
Divide
C = ((A/B)+P)*F
Hi-ab
Max of A or B
C = ((High value of
channel A or B)+P)*F
Lo-ab
Min of A or B
C = ((Low value of
channel A or B)+P)*F
Drauw
Draw
C = ((A/B)-1)*F
uw Avg
Weighted avg.
C = ((B-A)*F)+A
ratio
Ratio
C = (A/B)*F
Ratio2
Ratio 2
C = ((B-A)/A)+P)*F
Concen
Concentration
C = (A/(A+B))*F
Sunm t
Sum total
C = (tA+tB+P)*F
Sunmgt
Sum grand
total
C = (GtA+GtB+P)*F
Dif t
Difference of
total
C = (tA-tB+P)*F
Dif gt
Diff. of grand
total
C = (GtA-GtB+P)*F
Tratio
Total ratio
C = (tA/tB)*F
t-rat2
Total ratio 2
C = ((tB-tA)/tA)*F
T pct
Total percent
C = (tA/(tA+tB))*100
Const
Constant
Enter math equation
constants
adder
Adder
Addition constant used
in channel C math
calculations (P)
