PD6928 Ex-Proof & I.S. Loop-Powered Flow Rate/Totalizer
Instruction Manual
38
Enabling or Disabling Commas on the
Bottom Display (
COMMA
)
The bottom display is set to show a comma
separating the thousands and millions place by
default if a numeric value is being displayed. This
feature can be disabled or enabled using the
Comma
menu.
Display Capabilities Optimization
(
TOP
and
BOTTOM
)
Display Configuration Examples
The meter’s dual-line display can be setup in multiple
ways to provide an extremely informative view of the
process variable being monitored. The following
graphics show typical configurations:
Top Display:
Toggle Flow Rate and Rate Units
Bottom Display
: Toggle Total Flow and Total Units
Note:
To display units as GALLONS, select custom
units and enter the desired text.
Top Display:
Flow Rate
Bottom Display:
Toggling Between Units and Tag
Dual-Scale Mode:
Top Display:
Toggle Rate and GPM Units
Bottom Display:
Toggle Rate and CFM Units
Top Display:
Maximum Value
Bottom Display:
Process Value
Using 13 Digits to Display Total
The top and bottom displays can be set up to display a
13-digit total.
Note:
The number above should be read as
6,843,276,349,157
