Precision Digital Corporation PD6622-L2N Скачать руководство пользователя страница 2

Страница: 2 / 45

Loop Leader PD6620 Series Loop-Powered Flow Rate/Totalizers

Instruction Manual

Disclaimer

The information contained in this document is

subject to change without notice. Precision Digital

Corporation makes no representations or warranties

with respect to the contents hereof; and specifically

disclaims any implied warranties of merchantability or

fitness for a particular purpose.

• Read complete instructions prior to installation and

operation of the meter.

• Risk of electric shock or personal injury.
• This product is not recommended for life support

applications or applications where malfunctioning

could result in personal injury or property loss.

Anyone using this product for such applications

does so at his/her own risk. Precision Digital

Corporation shall not be held liable for damages

resulting from such improper use.

WARNING

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Limited Warranty

Precision Digital Corporation warrants this product

against defects in material or workmanship for the

specified period under “Specifications” from the date

of shipment from the factory. Precision Digital’s

liability under this limited warranty shall not exceed

the purchase value, repair, or replacement of the

defective unit. See Warranty Information and Terms

& Conditions on www.predig.com for complete details.

Registered Trademarks

NORYL

and LEXAN

are registered trademarks of

SABIC Innovative Plastics. All other trademarks

mentioned in this document are the property of their

respective owners.

© 2021 Precision Digital Corporation.

Introduction

These loop-powered 1/8 DIN flow rate/totalizers can

be installed virtually anywhere to provide convenient

and informative display of flow rate and total from a

4-20 mA signal. One of the most convenient features

of these instruments is their ability to display both flow

rate and total at the same time. For instance, flow rate

is typically displayed on the 5-digit alphanumeric top

line and flow total or grand total is typically displayed

on the 8-digit alphanumeric bottom line. Both display

lines use 14-segment, alphanumeric characters for

clear indication of tags, units, or alarm messages.
Further enhancing the display on these instruments is

a 20-segment bargraph available on the PD6624 and

PD6628 that also includes a numeric value of the

percentage the bargraph represents.
These flow rate/totalizers can be installed virtually

anywhere because they get their power from the

4-20 mA loop and therefore require no separate

power source. And they only drop 1.5 V (4.5 V with

backlight), so they add very little burden to the loop.

Additional features that allow these instruments to be

installed virtually anywhere include a NEMA 4X, IP65

front panel, an operating temperature range of

-40 to 167°F (-40 to 75°C) (for safe area products),

conformally coated PCBs, and a backlit LCD that can

be read in bright sunlight or dimly lit areas. Finally,

there are intrinsically safe and nonincendive versions

of these instruments that can be installed in

hazardous areas.
Free, PC-based, MeterView XL software that

connects to the meter via a micro USB cable is

available for programming and setup of the meters.

For more details, see the

LIM6622MVXL manual

All models come equipped with two open collector

outputs and a digital input. There are also models

available with two solid state relays and isolated

4-20 mA analog output options. The open collector

outputs are useful for alarm indication or pulse output.

The digital input can be used to reset the total. The

relays can be programmed for alarm indication, on/off

control, or simple batch control.

Содержание PD6622-L2N














































Результаты поиска

Содержание PD6622-L2N

Отзывы:

Похожие инструкции для PD6622-L2N

Бренды по названию

Популярные бренды

Precision Digital Corporation PD6622-L2N, Инструкция по эксплуатации

Результаты поиска

Содержание PD6622-L2N

Отзывы:

Похожие инструкции для PD6622-L2N

Бренды по названию

Популярные бренды