PD500
SuperNova PID Process & Temperature Controllers
www.predig.com
10
DIMENSIONS
Controller Dimensions
Units: in (mm)
Dimension
PD510
PD520
PD530
W
1.9 (48.0)
1.9 (48.0)
3.8 (96.0)
H
1.9 (48.0)
3.8 (96.0)
3.8 (96.0)
D
2.5 (63.0)
2.5 (63.0)
2.5 (63.0)
D1
0.2 (5.0)
0.2 (5.0)
0.2 (5.0)
T
W
H
Panel Mounting
••
Prepare the appropriate standard DIN panel cutout. Refer to
Figure 3. Panel Cutout Dimensions below for more details.
•
•
Clearance: allow at least 3.5" (88.4 mm) behind the panel
for wiring.
•
•
Panel thickness: 0.04" - 0.28" (1.0 mm - 7.0 mm).
•
•
Remove the mounting bracket(s) provided with the controller.
•
•
Insert controller into the panel cutout.
•
•
Install mounting bracket(s) and tighten the screws against
the panel. To achieve a proper seal, tighten the mounting
bracket screws evenly until controller is snug to the panel.
DO NOT OVER TIGHTEN, as the rear of the panel may be
damaged. See Figure 1 and Figure 2.
Figure 1 PD510 Mounting
Bracket Installation
Figure 2 PD520 & PD530
Mounting Bracket Installation
Figure 3 Panel Cutout Dimensions
H1
W1
B
A
Panel Cutout
Units: in (mm)
Dimension
PD510
PD520
PD530
W1
1.8 (45)
1.8 (45)
3.7 (93)
H1
1.8 (45)
3.7 (93)
3.7 (93)
A
2.4 (60)
2.7 (70)
4.6 (117)
B
2.4 (60)
2
4.8 (122)
4.6 (117)
1. +0.5 mm tolerance applied.
2. Allow 3.9 in (100.0 mm) above controller for use of a USB cable
with PD510.
