PD4-6624 & PD4-6628 Loop-Powered Flow Rate/Totalizers
Instruction Manual
59
Advanced Total and Grand Total Setup (
ADV TOTAL
&
ADV GTOTAL
)
The advanced total and grand total menu contain the count (
COUNT
) and reset (
RESET
) menus. The count menu
allows the digit limit to be selected between 8-digit (bottom display only) and 13-digit (uses top and bottom display to
display full number) and the initial value at which the total or grand total should start counting.
When using a 13-digit total or grand total, press the function key assigned to display (default: F1) to view the full
amount once the value has exceeded 100,000,000 (decimal places are automatically truncated). If a 13-digit total or
grand total is displayed on the bottom display and the value has exceeded eight digits, the truncated value will flash
to indicate that it is not the complete value. To display 13-digit grand total, assigned the top and bottom display to
grand total.
The reset menu is used to enable or disable the reset of the total and grand total.
Advanced Total Setup (
ADV TOTAL
)
Non-Resettable Grand Total
The grand total reset may be permanently disabled by selecting
YES
at the
PERMLOCK
menu after disabling grand
total reset.
•
Use caution
when selecting the
PERMLOC
feature
as once the
grand total reset has been permanently locked, it
cannot be unlocked.
ADV
TOTAL
LIMIT
13-DIGIT
ADV
GTOTAL
TOTAL
COUNT
TOTAL
RESET
COUNT
LIMIT
LIMIT
8-DIGIT
COUNT
INITIAL
COUNT
INITIAL
00000
0,000,000.0
COUNT
0,000,000.0
RESET
ENABLE
RESET
DISABLE
ENTER
F3
F2
F1
F2
F1
F2
F1
F2
F1
ENTER
F3
ENTER
F3
ENTER
F3
ENTER
F3
ENTER
F3
ENTER
F3
ENTER
F3
ENTER
F3
ADV
GTOTAL
GTOT
COUNT
RESET
DISABLE
NO
PERMLOCK
MENU
ENTER
F3
ENTER
F3
MENU
GTOT
RESET
F2
F1
ENTER
F3
