Pratica Forza Express Скачать руководство пользователя страница 14

Страница: 14 / 90

SPECIFICATIONS & INSTALLATION

Installation Warnings: Please read before lifting
oven to prevent injury

WARNING:

This unit weights approximately 191 lbs. (87kg). Never attempt to lift this unit with

fewer than 2 people.

WARNING:

The oven must be properly installed on a level surface at all times. Pratica Inc. will

not recognize damage from a fallen oven as a warranty and may void warranty all together.

WARNING:

Never lift the oven up by the door handle. Doing so may cause the door to misalign

or cause damage to door hinges which will not be covered by warranty.

WARNING:

Never lift the unit from the removable front panel under the door as it may get

damaged or may come loose while lifting.

WARNING:

This unit is not meant to be stacked. Please contact Pratica Inc. for further details.

WARNING:

This unit is not meant to be installed in an enclosed area without proper

ventilations. Damage may occur to components is oven installed in a structure that has 5 or
more sides preventing the minimum 4-6in clearance on side and 6-12in clearance from back
to wall.

Содержание Forza Express



























































































Результаты поиска

Содержание Forza Express

Отзывы:

Бренды по названию

Популярные бренды

Pratica Forza Express, Руководство по обслуживанию

Результаты поиска

Содержание Forza Express

Отзывы:

Бренды по названию

Популярные бренды