4590V100-IN
9
USB and PReset installation (Docking Mode Only)
The USB communication is supported by Windows® 2000, XP, Vista and
Windows® 7. PR devices that can either be programmed or have their
configurations saved, backedup/restored via ConfigMate 4590 are available in
the configuration program PReset ver. 6.0 or higher.
Technical characteristics
The PC program PReset ver. 6.0 or higher supports ConfigMate 4590. To
conserve power on a laptop, the USB connector of the 4590 can be connected
to an externally supplied hub. The communications connector on the PR device
is galvanically isolated from the USB connection on the PC.
System requirements
Access to internet is needed for installation of USB drivers
Installation rights
Windows
®
2000, XP, Vista and Windows
®
7 with the following
recommendations:
Hard disk space:
25 MB
USB:
Version 2.0 or higher
CONTENTS
