PP Systems CIRAS-2, Руководство оператора

Страница: 43 / 167

System Setup and Operation
CIRAS-2 Operator's Manual Version 2.04
- 41 -
System Setup and Operation
Settings information provides the basis for your individualized use of CIRAS-2 and will be automatically
saved for you. Selections made in the Settings dialog are global and apply universally to a CIRAS-2
session, unlike those made with the Control Setpoint buttons, which are temporarily applied to the
session. The most recently used preferences and settings will load each time that the RCS program is
started, and the login procedure will be circumvented.
Set File Options
Set Entry Name
Click on
Setup in the CIRAS main menu bar to open the Settings
dialog. In the „SET Entry Name‟ field at
the top of the dialog select „Default SET Name 1‟ from the dropdown list. A single
Set File will allow up to
10 parameter setups ( PRM Files , below) containing unique combinations of cuvette/chamber type, light
source, controlled environmental conditions, recording options and real-time graphing options.
Edit Entry Name
Next, click on Edit Entry Name , enter a short descriptive name in the Rename dialog, .e.g. your current
experiment.