powersoft Ottocanali HGT Series, Руководство по обслуживанию

Страница: 13 / 24

13
OTTOCANALI HGT | SERVICE MANUAL
INDEX
8. Disassembling the 8CHHGT/STD/CNTRL Board
Prior to removing the CNTRL Board it is necessary to
remove the FRONT Board.
Start by gently unplugging all the connectors highlighted
in yellow on (Fig. 13).
Proceed by unscrewing the screws and bolts highlighted
in light blue on (Fig. 13), with a combination of a PH1
phillips head and M6 socketed screwdrivers.
At this point it is possible to gently lift the CNTRL board
and disconnect the last 8 Micromatch connectors that
are still connected to the board. (Fig. 14)
Fig. 13
Fig. 14