Powersmart DB7004, Инструкция по эксплуатации

Страница: 16 / 34

16
AUGER AND DRIVE CONTROLS
1. To engage the auger, press down on the auger control handle (left side handle).
2. To engage the drive, press down on the drive control handle (right side handle). The machine should
start moving in the direction and speed that the speed control lever is set to.
3. When finished clearing a snow path, release the auger control handle and the drive control handle.
Attention:
Release (disengage) the auger and drive control handles before adjusting the drive speed
control lever. Never change the drive speed while your snow thrower is moving, it could damage the
drive mechanism and void the warranty.
OPERATING YOUR SNOW THROWER
CLEARING SNOW
Start the engine once your Snow Thrower has been running outside for several
minutes, it is now ready for use. Make sure the path in front of your Snow Thrower is free from people,
animals, objects, and all other obstructions except for snow.
Adjust the chute outlet to the desired direction.
Turn the chute rotation handle clockwise or counter-clockwise until the desired position is reached.
WARNING! Never direct the chute outlet toward people or animals. While snow may seem harmless, it
can contain rocks or other debris that can cause serious injury when projected through the chute.
1. Engage/depress the auger control handle to start the augers and impeller turning.
2. Set the desired direction and speed using the speed control lever.
3. Engage/depress the drive control handle and direct the snow thrower into the snow to be cleared.
To manual start the engine,perform the following steps
1. Move the fuel valve lever to the ON position.
2.To start a cold engine, move the choke lever to the CLOSE position.
To restart a warm engine, leave the choke lever in the OPEN position.
3.Turn the engine switch to the ON position.
4.Pull the starter grip lightly until you feel resistance, then pull briskly. Return the starter grip gently
5. If the choke lever has been moved to the CLOSE position to start the engine, gradually move it to
the OPEN position as the engine warms up.
MANUAL START THE ENGINE