- 27 -
3.3.0. settinG riVets
DANGER
The riveting tool must always be placed on the surface to be
riveted at a right angle (90°). Tilted placement will lead to
incorrect riveting.
Only use the correct nosepice for the rivet. An incorrect
nosepiece can damage the clamping jaws and the
nosepiece.
The size of the drillhole and the clamping range can be found
in the manufacturer rivet specifi cations.
1. Place the blind rivet in the nosepiece
2. Insert the blind rivet into the prepared drillhole
3.
Press the rivet fi rmly against the component
(pressure check)
4. Start the preset stroke by pressing and holding the start
button
5. Release the start button
6. Let the torn-off rivet mandrel slide into the rivet mandrel
collection container by tilting the riveting tool.
Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11-90
E-Mail: [email protected] – Internet: www.hs-technik.com
